Skip to main content

Learning Center · Learn · Heating, cooling & air quality

MERV Ratings Explained: Choosing an Air Filter

Higher isn't automatically better. How to pick a filter your system can actually breathe through.

Learn

The short answer

MERV is a 1-to-16 scale for how well an air filter captures particles. Higher numbers catch smaller particles but can also restrict airflow. The right filter is the highest MERV your system is set up to handle, changed on schedule. A clogged filter of any rating causes more trouble than a lower-rated clean one.

Written by Comfort Systems of York County team

Last updated

Definition

What does a MERV rating tell you?

MERV stands for Minimum Efficiency Reporting Value. Filters are tested against particles of different sizes, and the rating summarizes how well they capture them. Low-MERV filters mostly protect the equipment from dust and lint. Mid-range filters also catch finer dust and pollen. Higher ratings catch smaller particles still.

A thicker media filter, like the AprilAire filters we install, can offer a higher MERV with less airflow restriction than a thin one-inch filter at the same rating, because there's more surface area.

When it applies

When should you change or upgrade your filter?

Change or reconsider your filter when:

  • It looks gray or clogged. Check monthly during heavy summer and winter use.
  • You have pets, recent remodeling dust, or a busy household.
  • Airflow from vents seems weaker than it used to be.
  • You want better filtration. A media cabinet may handle it better than a thin high-MERV filter.

Failure modes

What filter mistakes cause problems?

Filters are simple, but they cause a surprising number of service calls.

  • A filter left in too long restricts airflow and can freeze the evaporator coil.
  • A thin, high-MERV filter can raise static pressure in a system not designed for it.
  • Gaps around a filter that's the wrong size let air bypass it entirely.
  • Installing it backward. Follow the arrow toward the equipment.

Proof

How do we help with filtration?

We install AprilAire filters and media cabinets, and we can measure static pressure to see what your system tolerates before recommending a higher rating. Filter changes are a homeowner job; we'd rather show you how to do it right than sell you a visit for it.

Next step

What's the next step?

Check your filter today and note its size and MERV. For how often to change it here, see how often to replace your air filter in South Carolina. If you're considering more filtration, compare whole-home vs. portable air purifiers, or schedule a visit.


Common questions

Is a higher MERV filter always better?
Not always. A higher MERV filter captures smaller particles but can restrict airflow in systems not set up for it. A thicker media filter is often the better way to filter more.
How often should I change my air filter?
It depends on the filter type, pets, and how hard the system runs. Check thin filters monthly in peak seasons. Our blog covers South Carolina timing in detail.

Where to go next

← Back to the Learning Center HVAC glossary

How we wrote this: general guidance from Comfort Systems of York County, based on the work we do across York, Chester, and Lancaster Counties and the greater Charlotte area. It isn't a quote or a diagnosis. Every home is different, so a technician's inspection comes first.

Call Or Schedule

Rather have us take a look?

Call the number folks around here have been calling since 1965. Emergency service with a technician on call 24/7.

Call Rock Hill & York, Chester & Lancaster Counties

Call or Text (803) 324-7572

SC Lic. #112349 · NC Lic. #31373 · 5010 Old York Rd, Rock Hill, SC 29732

Call or Text (803) 324-7572 Schedule